Dense Cloud

Photogrammetric Data Processing and Analysis

Français

Learn About

Giving meaning to your data

Dense Cloud is a photogrammetric processing company that originates in the processing of seismic data for the deep offshore oil industry.

The Dense Cloud team and partners are all passionate about aeronautics, professional pilots and UAV certified remote pilots. Their knowledge of regulations, flight preparation and data acquisition enables them to understand the constraints of field missions.

The added value of Dense Cloud is listening, quotes adapted to your needs, secure data and high computing power for fast deliveries.

Building and Public Work

Structure and construction site inspection 300.-

3D Modeling 650.-

DEM/DTM (exporAutoCAD/Autodesk, QGIS) 250.-

Orthophoto, azimuth panoramic view 200.-

Airborne LiDAR: upon request

On field intervention: 1/2 to 1 day

Post-processing and report: 24 to 48 hrs


Quarries

Volume measurement +/- 10 m3: 30.- / stock pile

Hangar stocks: 35.- / stock

Pack DEM, orthophoto, exports (.dxf): 400.-

On field intervention: 40 to 60 ha 1/2 day

Post-processing and report: 24 to 72 hrs


Agriculture

Orthophoto 5.- / ha

Vegetation index maps NDVI, NDRE, OSAVI: 8.- / ha

Tree count: upon request

Real-time visualisation

Post-processing and report: 24 hrs


Surveillance and Security

Tethered Drone 24/7 visible and infra-red (Aerocam Services)

Thermography

Draft diagnosis 200.-


QGIS course: geospatial and hydrology analysis.

QGIS
Thermography course with the DJI Zenmuse XT2 camera on DJI Matrice 210.

camera thermique dji xt2
A few manipulations on the Smart Controller allow you to benefit from DJI Pilot on Mavic 2 Pro. DJI Pilot will remain active even after the SC is rebooted. It will be possible to switch back to DJI Go 4 by simply activating a parameter. As the Mavic 2 Pro is equipped with a Hasselblad 20Mpx sensor well fitted for photogrammetry, it is incomprehensible that DJI only activates DJI Pilot on the Mavic Enterprise series (the Zoom Enterprise having only a 12Mpx sensor of lower subjective quality). However I still use Pix4Dcapture on SC for my flight planning. The tutorial is available on request.
dji pilot mavic 2 pro
Inspections and videos with Aerocam Services.

bassam
abidjan roof top
Pix4D Mapper vs Agisoft Metashape benchmark. Paper upon request.
Pix4D mapper
Dense Cloud provides now photogrammetry data acquisition training (quarry) on DJI Matrice 210 with Zenmuse Z5S camera.
DJI Matrice 210
Dense Cloud has performed tests with the DJI Phantom 4 RTK, the rover DJI D-RTK 2 Mobile Station and the DJI Terra software for fast 2D acquisition and 3D buildings reconstruction. The paper is available upon request.
DJI Terra 3D buildings
Dense Cloud has been selected by Flying Eye to provide Photogrammetry training on Agisoft Metashape. For more information please contact Stéphanie Bonnet.
Agisoft Metashape Photoscan logo
News about our projects and achievements will find their place in this section!

Address


Olivier Mettler

Route des Toches 9
Echandens 1026, Suisse (VD)

French DGAC License number: ED8147

Mobile


Olivier:
+41 (0)79 925 92 58